Connecting On Windows; Logging In From Uart - Safran WR-ZEN Series User Manual

3.2 Connecting to the Device
3.2.5

Connecting on Windows

3.2.5.1

Logging in from UART

The connection to the UART in the WR-ZEN Series can be made by using Putty,
the SSH and Telnet client for Windows, as it supports serial connections too.
When having connected the RJ45-RS232-USB cable to the Windows PC, a new
serial port identified by COM<number> at the Device Manager, as can be
checked in the figure below.
Figure 3-1: Device manager. New serial port detected.
Afterwards, the connection can be made through Putty. The connection type
should be marked as Serial at <1>.The serial port name COM<number> should be
placed at <2>, and the port speed (115200 Bd) at <3> (see below).
CHAPTER •
30
3 WR-ZEN Series User Manual Rev. v5.1