Oracle Database Appliance X10 Service Manual page 110

Return the server to operation.
10.
Install the air baffle.
a.
See Install the Air
Install the server top cover.
b.
See Install the Server Top
Return the server to the normal rack position.
c.
See Return the Server to the Normal Rack
Reconnect the power cords to the power supplies, and power on the server.
d.
See Powering On Oracle Database
Verify that the power supply AC OK LED is lit.
e.
Use Oracle ILOM to clear server processor faults.
11.
To show server faults: log in to the server as root using the Oracle ILOM CLI,
a.
and type the following command to list all known faults on the server:
-> show /SP/faultmgmt
The server lists all known faults, for example:
show /SP/faultmgmt
->
Targets:
shell
0 (/SYS/MB/P0)
Properties:
Commands:
cd
show
Alternatively, log in to the Oracle ILOM service processor from the Oracle
ILOM Fault Management Shell and issue the fmadm faulty command. For
more information about how to use the Oracle ILOM Fault Management Shell
and supported commands, see the Oracle ILOM User's Guide for System
Monitoring and Diagnostics at
Baffle.
Cover.
Position.
Appliance.
Oracle ILOM
Servicing Processors (FRU)
Documentation.
Chapter 5
5-18