Remove The Air Baffle - Oracle Database Appliance X10 Service Manual

Lift up and remove the top cover [2].
4.

Remove the Air Baffle

Prepare the server for service.
1.
a.
b.
c.
d.
e.
Remove the air baffle by lifting the baffle up and out of the server.
2.
Lift up the air baffle in the rear at a 50 degree angle, and slide slightly rearward to
clear the air baffle tabs that prevent the front of the baffle from lifting up.
Power off the server.
See Powering Down the Server.
Disconnect the power cords from the power supplies.
See Disconnect Cables From the
Extend the server into the maintenance position.
See Extend the Server to the Maintenance
Attach an antistatic wrist strap to your wrist and then to a metal area on the
chassis.
See Take Antistatic Measures.
Remove the server top cover.
See Remove the Server Top
Preparing the Server for Component Replacement
Server.
Position.
Cover.
Chapter 2
2-20