Component Fault Management - Oracle Database Appliance X10 Service Manual

Table of Contents

Advertisement

Return the server to operation.
11.
a.
b.
c.
d.

Component Fault Management

Perform component fault management on Oracle Database Appliance systems.
Typically, when a faulty component is replaced and the server is returned to service,
the fault state of the component in Oracle ILOM is automatically cleared and the
component Service Required indicator will turn off. This is the default behavior for all
components that have an embedded FRU serial number in the component firmware.
For replaced components that do not have an embedded FRU serial number, or do not
automatically clear their fault state after the component has been repaired and the
server is returned to service, you can use Oracle ILOM command line interface to
manually clear the fault state. Use the following syntax:
set /path_to_target clear_fault_action=true
Where path_to_target is the path to the component (such as a DIMM) that had the
fault.
In addition, the Fault Management shell can also be used. Use of the Fault
Management shell is reserved for Oracle Service. For more information on component
fault management:
Refer to the Oracle ILOM User's Guide for SystemMonitoring and Diagnostics
available in the
Caution:
When reinstalling power supplies, it is important to reinstall them into the
slots from which they were removed during the motherboard removal
procedure; otherwise, the server key identity properties (KIP) data might
be lost. When a server requires service, the KIP is used by Oracle to
verify warranty information. For more information on KIP, see
Identity Properties (KIP) Automated
Install the server top cover.
See
Install the Server Top
Return the server to the normal rack position.
See
Return the Server to the Normal Rack
Reconnect the power cords to the power supplies, and power on the server.
See
Powering On Oracle Database
Verify that the power supply AC OK LED is lit.
Oracle ILOM Documentation Library
Update.
Cover.
Position.
Appliance.
for your version of Oracle ILOM.
Chapter 5
Component Fault Management
FRU Key
5-52

Advertisement

Table of Contents
loading

Table of Contents