Servicing Frus; Servicing Processors (Fru) - Oracle Database Appliance X10 Service Manual

5

Servicing FRUs

Perform tasks for servicing field-replaceable units (FRUs) for the Oracle Database Appliance
that require you to power off the system and/or server node.
When servicing FRU components, the server node and/or system must be powered down
and the AC power cords disconnected.
Note:
Only authorized Oracle Service personnel can service FRU components.
•

Servicing Processors (FRU)

Perform tasks described in this section to service processors.
• Servicing the Fan Tray (FRU)
Perform tasks in this section to service the fan tray.
• Servicing the Disk Backplane (FRU)
Perform tasks in this section to service the disk backplane.
• Servicing the Front LED Indicator Module (FRU)
Perform tasks in this section to service the front LED indicator module.
• Servicing the PCIe Slot Flyover Cable (FRU)
Perform tasks in this section to service the PCIe Slot Flyover Cable.
• Servicing the Motherboard Assembly (FRU)
This section describes how to service the motherboard assembly.
• Component Fault Management
Perform component fault management on Oracle Database Appliance systems.
Servicing Processors (FRU)
Perform tasks described in this section to service processors.
Processors are replaceable components that require you to power off the server before
servicing.
Caution:
Ensure that all power is removed from the server before removing or installing a
processor. You must disconnect the power cables from the system before
performing these procedures.
5-1