Oracle Database Appliance X10 Service Manual page 86

You hear an audible click when the PCIe card is secured into the slot.
If it is difficult to reconnect the cables to the PCIe card when the card is inserted into the
PCIe slot, consider performing the procedure in Step 5 before completing this step.
Reconnect any cables to the PCIe card that you unplugged during the removal procedure
5.
[2].
Return the server to operation.
6.
Install the server top cover.
a.
See Install the Server Top
Return the server to the normal rack position.
b.
See Return the Server to the Normal Rack
Reconnect the power cords to the server power supplies, and power on the server.
c.
See Powering On Oracle Database
Verify that the System OK LED indicator is lit.
d.
Use Oracle ILOM to clear any server PCIe card faults.
7.
If a PCIe card fault message in Oracle ILOM is not cleared under Open Problems, you
must manually clear the fault using Oracle ILOM. refer to "Clear Faults for Undetected
Replaced or Repaired Hardware Components" in the Oracle ILOM User's Guide for
System Monitoring and Diagnostics at
Cover.
Position.
Appliance.
Oracle ILOM Documentation.
Chapter 4
Servicing PCIe Cards (CRU)
4-21