Power Down The Server For Immediate Shutdown Using Oracle Ilom Cli; Power Down The Server For Immediate Shutdown Using Oracle Ilom Web Interface - Oracle Database Appliance X10 Service Manual

Power Down the Server for Immediate Shutdown Using Oracle ILOM CLI

Caution:
An immediate power-off might corrupt system data, therefore, use this
procedure to power down the server only after attempting the graceful power
down procedure.
Log in to the Oracle ILOM command-line interface (CLI) using an Administrator
1.
account.
Refer to
Oracle ILOM displays the default command prompt (->), indicating that you have
successfully logged in to Oracle ILOM.
At the CLI prompt, type the following command:
2.
-> stop -f /System
The server powers down immediately to Standby power mode.
Disconnect the power and data cables from the server.
3.
See
Power Down the Server for Immediate Shutdown Using Oracle ILOM Web
Interface
Caution:
An immediate power-off might corrupt system data, therefore, use this
procedure to power down the server only after attempting the graceful power
down procedure.
Caution:
When you power down the server using the On/Standby button, the
server enters Standby power mode. Power is still directed to the service
processor and power supply fans. To completely power off the server,
you must disconnect the power cords from the power supplies.
Oracle ILOM Documentation.
Disconnect Cables From the
Caution:
When you power down the server using Oracle ILOM, the server enters
Standby power mode. Power is still directed to the service processor and
power supply fans. To completely power off the server, you must
disconnect the power cords from the power supplies.
Preparing the Server for Component Replacement
Server.
Chapter 2
2-10