High Flow Purge And Solvent Flush - Edwards EXS Series Instruction Manual

Table 19 DP clean sequence
Sequence
Dry pump clean
The DP clean high flow purge and solvent flush procedures can be run as often as
required.

6.7.1 High flow purge and solvent flush

Operation instruction of high flow purge and solvent flush is provided together with the
kit, contact us.
A41870880_A
A41870880_A - Operation
Description
▪ Purge gas or the solvent fluid is admitted into the pump for a
configurable time (recommended 20 minutes).
▪ Pump speed during the dry pump clean is configurable
(recommended 40 Hz).
▪ Keep gas purges on.
▪ Pump is not able to go on‑process until the cycle has
completed.
Page 54 07/2021 - ©Edwards Limited