Locate The Dry Pumping System; Figure 10 Installation Drawing - Exs450 - Edwards EXS Series Instruction Manual

Figure 10 Installation drawing - EXS450

A. Isolation valve A. Isolation valve
1. Process inlet 1. Process inlet
3. Motor cranking access 3. Motor cranking access

5.2 Locate the dry pumping system

WARNING:
Suitable lifting equipment must be used to move the dry pumping system. It is too
heavy to lift by hand.
A41870880_A
A41870880_A - Installation
Page 30
B. Utility side B. Utility side
2. Exhaust outlet 2. Exhaust outlet
4. Mains power inlet 4. Mains power inlet
07/2021 - ©Edwards Limited