Introduction; Scope And Definitions; Applications; Description - Edwards EXS Series Instruction Manual

2. Introduction

2.1 Scope and definitions

This manual provides the installation, operation and maintenance instructions for the
dry pumping system. The pump must be used as specified in this manual. Read this
manual before the installation and operation of the pump.
The units used throughout this manual conform to the SI international system of units of
measurement.
The safety data sheets for the chemicals supplied by us can be obtained by contacting
us, or at www.edwardsvacuum.com.

2.2 Applications

The dry pumping systems are suitable for a wide range of industrial applications. We
have a dedicated team of applications engineers who can help to determine the best dry
pumping system for an application.
Warranties may be invalidated if the dry pumping system is used on an unsuitable
application. If in doubt, contact us.

2.3 Description

The dry pumping systems range has been developed to meet the demanding
requirements for process pumping solutions in industrial applications. The range sets
new standards for harsh process capability, reliability and reduced cost of ownership in
low footprint packages.
The dry pumping system is designed as a plug and play system. Connect the dry pumping
system correctly and provide the power, it will start automatically. Start, stop and the
emergency stop button can be installed and used to control the dry pumping system. For
more details, refer to
A high flow purge and the solvent flush kit are available as a factory‑fit option to clean
the pump mechanism on applications where large quantities of dust and sticky deposits
are encountered.

2.4 Interface overview

Refer Front view
A41870880_A
A41870880_A - Introduction
Figure: Service diagram.
on page 10 and Rear view
Page 9
on page 12 for interface overview.
07/2021 - ©Edwards Limited