Table of Contents
Advertisement
4. Transportation
WARNING:
Do not drain the oil from the pumps whether dangerous substances have been
pumped or not. Blanking plates must be fitted to seal all vacuum inlet and outlet
ports (to prevent possible oil leakage). Ensure that the dry pumping system is
correctly labelled, if in doubt, contact us.
Follow the procedure laid out in
form HS2, which can be found at the back of this manual.
A41870880_A
A41870880_A - Transportation
Storage
on page 71 and then read form HS1 and fill out
Page 26
07/2021 - ©Edwards Limited
Advertisement
Table of Contents
