Table of Contents
Advertisement
9. Storage
Drain the cooling water from the dry pumping system. If transporting or storing it in
conditions where the cooling water could freeze, refer to
page 58. Failure to observe the instructions could result in the cooling water freezing in
the dry pumping system and damage to the pumps and/or the cooling water pipelines.
Store the dry pumping system as follows:
1.
Follow the procedure set out in
on page 57.
2.
Store the dry pumping system in clean dry conditions until required.
3.
If the pump is to be stored for longer than six weeks, it must be manually rotated
every 14 days or less. Contact us for details.
4.
When required for use, prepare and install the dry pumping system as described in
Installation
A41870880_A
A41870880_A - Storage
Relocate the dry pumping system for maintenance
on page 27 of this manual.
Page 71
Draining the cooling water
07/2021 - ©Edwards Limited
on
Advertisement
Table of Contents
