Electrical Supply; Figure 13 Interspool Connections On The Pump - Edwards EXS Series Instruction Manual

Figure 13 Interspool connections on the pump

1. Interspool 1. Interspool

5.8 Electrical supply

WARNING:
Ensure that the electrical installation of the dry pumping system conforms to all local,
regional and national safety requirements. It must be connected to a suitably fused
and protected electrical supply and a suitable earth (ground) point.
WARNING:
The pump will restart automatically when the electrical supply is restored after an
electrical supply failure. To prevent the automatic restart, the pump must be
connected to the electrical supply through suitable control equipment which must be
reset manually after an electrical supply failure.
WARNING:
Risk of electric shock. Isolate the electrical supply before disconnecting the electrical
supply cable from the dry pumping system.
A41870880_A
A41870880_A - Installation
Page 40
2. G 3/8 inch BSP port 2. G 3/8 inch BSP port
07/2021 - ©Edwards Limited