Connecting The Dry Pumping System For Serial Communications; Modbus; Figure 17 Dp Clean Assembly For The Pump Only Systems - Edwards EXS Series Instruction Manual

Figure 17 DP clean assembly for the pump only systems

1. Air filter 1. Air filter
3. Inlet spool 3. Inlet spool
5. Pneumatic regulator 5. Pneumatic regulator
7. Pneumatic valve 7. Pneumatic valve

5.16 Connecting the dry pumping system for serial communications

5.16.1 MODBUS

MODBUS-RTU communication is available (AC D+ D-). Refer to
for more information.
A41870880_A
A41870880_A - Installation
Page 49
2. DP clean solvent flush fluid connection 2. DP clean solvent flush fluid connection
4. Pneumatic valve inlet connection 4. Pneumatic valve inlet connection
6. Optional connection to the pneumatic 6. Optional connection to the pneumatic
valve sensor valve sensor
8. Pneumatic valve electrical connection 8. Pneumatic valve electrical connection
Figure: Service diagram
07/2021 - ©Edwards Limited