UM-WI-056
DA16200 DA16600 FreeRTOS Getting Started Guide
5
Software Development Kit
5.1
Introduction
The DA16200 is a highly integrated ultra-low power Wi-Fi system on chip (SoC) that allows users to
develop Wi-Fi solutions using a single chip. Wi-Fi applications can be developed f or the DA16200
using the DA16200 FreeRTOS SDK and the Renesas e
based development system.
To start developing applications f or the DA16200, f ollow the steps below:
●
Install and conf igure the e
●
Import the DA16200 SDK into the e
●
Download and test the application
●
Use J-Link debugger to debug the application
The f ollowing describes each of these steps.
5.2
System Requirements
●
OS: Windows 10 64bit or Ubuntu 20.04 LTS
●
GNU Arm GCC 10.3
●
2
Renesas e
studio 2023-07 (23.7.0) or later
●
J-Link Debug Probe
NOTE
For Linux OS
●
Install mandatory library for executing e² studio
○
libpython3.10
Open a terminal window and enter the commands below :
–
sudo add-apt-repository ppa:deadsnakes/ppa
–
sudo apt-get update
–
sudo apt-get install libpython3.10
2
5.3
Installing e
studio IDE
2
To install the e
studio, download and run the e
2
e
studio website:
https://www.renesas.com/us/en/sof tware-tool/e-studio
User Manual
CFR0012
2
studio IDE
2
studio IDE and build an application
2
studio installer f or either Windows or Linux f rom the
Figure 13: Download e2studio Installer
Revision 1.8
34 of 106
2
studio IDE on either a Windows 10 or Linux
© 2023 Renesas Electronics
Aug. 18, 2023