Table of Contents
Advertisement
UM-WI-056
DA16200 DA16600 FreeRTOS Getting Started Guide
Figure 64: DA16200 EVB Ver 9.0 Hardware Configuration
DA16200 EVB V9.0 has the f ollowing components:
Table 18: Components on DA16200 EVB
No
Name
1
DA16200MOD-AACWA32
2
Board information
3
FH2232H block
CN6 – USB port
4
J7 – JTAG connector
5
S2 – Factory reset button
6
S1 – WPS button
7
SW5 – RTC_WAKE_UP switch
8
SW6 – RTC_PWR_KEY switch
9
P1 – External VDD
10
User Manual
CFR0012
Description
Renesas Wi-Fi Module.
Board version and manufacturing date.
USB to UART/SPI interfaces.
Provides UART0 for debug, UART1/2 for test and SPI.
Connector for the IAR I-jet JTAG Debugger
Note: Pin 7 of the I-Jet debugger cable is keyed with a white
plug so pin 7 must be removed from the EVB.
Factory reset button using GPIOA7.
To enable this button, set Pin 2 of SW4 to ON and press the
button for more than 5 seconds to initialize nvram data.
WPS button using GPIOA6.
To enable this button, set Pin 1 of SW4 to ON and press the
button to start WPS mode.
Switch to wake up the board from sleep mode.
Switch to turn the EVB ON and OFF.
External VDD (3.3V) can be supplied to the P1 pins.
For normal operation, this jumper should be shorted.
Revision 1.8
76 of 106
Aug. 18, 2023
© 2023 Renesas Electronics
Advertisement
Table of Contents
