Table of Contents
Advertisement
UM-WI-056
DA16200 DA16600 FreeRTOS Getting Started Guide
Appendix A Old Versions of EVB
A.1
DA16200 EVB Ver 10.0
Figure 63
shows the hardware conf iguration of the DA16200 EVB.
Figure 63: DA16200 EVB Hardware Configuration
DA16200 EVB Ver 10.0 has the f ollowing components:
Table 16: Components on DA16200 EVB
No
Name
1
DA16200MOD-AACWA32
2
Board Information
3
FH2232H Block
CN6 – USB Port
4
J7 – JTAG connector
5
S2 – Factory reset button
6
S1 – WPS button
7
SW5 – RTC_WAKE_UP switch
8
User Manual
CFR0012
Description
Renesas Wi-Fi Module.
Board version and manufacturing date.
USB to UART/SPI interfaces.
Provides UART0 for debug, UART1/2 for test and SPI.
Connector for the IAR I-jet JTAG Debugger
Note: Pin 7 of the I-Jet debugger cable is keyed with a white plug
so pin 7 must be removed from the EVB.
Factory reset button using GPIOA_7.
To enable this button, set Pin 2 of SW4 to ON and press the
button for more than 5 seconds to initialize nvram data.
WPS button using GPIOA_6.
To enable this button, set Pin 1 of SW4 to ON and press the
button to start WPS mode.
Switch to wake up the board from sleep mode.
Revision 1.8
73 of 106
Aug. 18, 2023
© 2023 Renesas Electronics
Advertisement
Table of Contents
