Table of Contents
Advertisement
UM-WI-056
DA16200 DA16600 FreeRTOS Getting Started Guide
Once the f irmware images are programmed successf ully, the device can be conf igured by doing the
Wi-Fi provisioning process. See Section
interf ace.
Please ref er to README.md in python f older f or more detail about how to use
uart_program_da16200(.exe/py).
4.5.2
Using Macro Script of Tera Term
This tool is f or Windows only and the programming can be done automatically using a macro script of
tera term. This macro f iles are available in the
SDKROOT\apps\da16200\get_started\projects\da16200 or da16600\img\ f older in SDK package or
each image f older of image package.
The serial port should be set up as shown in
available ports f rom DA16600 EVB must be selected f or DA16200 debug interf ace.
The macro can be run as f ollows.
1. Once tera term is running and connected to the DA16200/DA16600, open the Control tab, and
select the Macro menu item.
2. When the MACRO: Open Macro f ile selection window opens, navigate to the directory where the
f irmware images are stored and select the .ttl f ile as
3. Af ter opening the macro f ile, the FBOOT f irmware image is programmed as shown in
User Manual
CFR0012
4.6
f or details on how provision the Wi-Fi communication
Figure 4.
Figure 4: Serial Port Setup in Tera Term
Figure 5: Open Macro File
Revision 1.8
23 of 106
For DA16600, the lower port number of 2
Figure 5.
Figure
6.
Aug. 18, 2023
© 2023 Renesas Electronics
Advertisement
Table of Contents
