Network Commands; Table 25: Network Commands - Renesas FreeRTOS DA16200 User Manual

UM-WI-056
DA16200 DA16600 FreeRTOS Getting Started Guide
Command Parameters
ps (none)
setup (none)
reboot (none)
[mode]
reset (none)
ver (none)
time [option]
getwlanmac (none)
[xx:xx:xx:xx:xx:xx
setwlanmac
| xx-xx-xx-xx-xx-
xx |xxxxxxxxxxxx]
dpm [options]
B.1.2

Network Commands

To move to the network command category, type the command net.

Table 25: Network Commands

Command Parameter
[interface]
arp
[options]
arpsend [interface]
[dst
ipaddress]
[interface]
garpsend
[option]
Arping [interface]
[options]
User Manual
CFR0012
Description
Display thread information
DA16200 general function setting wizard (Easy Setup)
Make step-by-step configuration settings for elements such as
SYSMODE, WI-FI, and NETWORK
Reboot
por: POR rebooting
Reset to the Bootloader prompt
Display SDK version & system information
Display or set the current time.
time set [YYYY-MM-DD] [hh:mm:ss]: set date and time
time zone [-hh:mm]: set time zone
time boot: display booting time
time uptime: display booting duration
time help: display help
Display the MAC address for network interfaces
Set up the MAC address for network interfaces.
For example: setwlanmac aa:bb:cc:00:00:02 | aa-bb-cc-00-00-
02 | aabbcc000002
Set DPM condition
on | off: DPM feature enabled or disabled
status: DPM status print
rtm: view DPM backup data
rtc: view DPM RTC timer
debug [level]: turn DPM debug on / off
level = 1(MSG_ERROR), 2(MSG_INFO), 3(MSG_DEBUG),
4(MSG_EXCESSIVE)
Description
Display the ARP table of a network interface
●
a: display the ARP table of every interface
●
d: delete all of ARP table
Help: Help display
Transmit the ARP request message of the target IP
For example: arpsend wlan0 10.0.0.1
Transmit a GARP message with option:
●
0: normal garp
●
1: check IP conflict
For example: arpsend wlan0
Send ARP ping to target IP
●
-I [wlan0|wlan1] : Interface name
Revision 1.8
85 of 106
Aug. 18, 2023
© 2023 Renesas Electronics