Evaluation Kits; Introduction; Da16200 Evb Ver 11.0; Figure 1: Da16200 Evb Hardware Configuration - Renesas FreeRTOS DA16200 User Manual

UM-WI-056
DA16200 DA16600 FreeRTOS Getting Started Guide
4

Evaluation Kits

4.1

Introduction

The DA16200 and DA16600 EVKs are designed to allow a customer to test and develop Wi-Fi
applications very quickly.
The EVK contains:
○
Evaluation Board: The specif ic board with either DA16200MOD or DA16600MOD installed
○
USB cable
4.2

DA16200 EVB Ver 11.0

Figure 1 shows the hardware conf iguration of the DA16200 EVB.
DA16200 EVB Ver 11.0 has the f ollowing components:

Table 1: Components on DA16200 EVB

No Name
J2 – GPIO External pin-out
1
2 SW7– UART0 selection switch
CN3 – Jumper to POWER
3
P7 – GND Pins
4
5 Board Information
User Manual
CFR0012

Figure 1: DA16200 EVB Hardware Configuration

UART0 selection switch, default ON, see
5V Power Selection from USB or External
GND for Test
Board version and manufacturing date
Revision 1.8
9 of 106
Description
Table 2.
Aug. 18, 2023
© 2023 Renesas Electronics