Figure 23: Build Project; Figure 24: Generate Configuration; Figure 25: Generate Configuration Warning Pop-Up - Renesas FreeRTOS DA16200 User Manual

UM-WI-056
DA16200 DA16600 FreeRTOS Getting Started Guide
NOTE
The SDK building project process may take several minutes depending on your computer.
2. If this build process is perf ormed f or the f irst time, the Generate Conf iguration pop-up window is
displayed automatically so that the f lash memory type can be selected. Select the f lash type and
click Generate to create the appropriate f lash conf iguration f ile required to build the f irmware.
If the pop-up window is closed without selecting and generating a conf iguration f ile, a warning pop-up
will be displayed.

Figure 25: Generate Configuration Warning Pop-Up

This step cannot be skipped due to a f lash conf iguration f ile is required to build the f irmware. When
the build is complete, the f ollowing output is displayed in the e
User Manual
CFR0012

Figure 23: Build Project

Figure 24: Generate Configuration

Revision 1.8
41 of 106
2
studio console window.
© 2023 Renesas Electronics
Aug. 18, 2023