Table of Contents
Advertisement
UM-WI-056
DA16200 DA16600 FreeRTOS Getting Started Guide
iperf -I [INTERFACE] [-s/-c] [DESTINATION IP] (-u) -i [INTERVAL TIME] -t [TEST TIME]
6.3.3
Throughput Test with DA16200/DA16600 as Server
To set-up the throughput test with the DA16200/DA16600 operating as a server and the laptop
operating as a client, f ollow the steps below:
1. Power on the DA16200/DA16600 and check the assigned IP address in the DA16200/DA16600
console window:
Connection COMPLETE to 80:ca:4b:30:02:0a
-- DHCP Client WLAN0: SEL(6)
-- DHCP Client WLAN0: REQ(1)
-- DHCP Client WLAN0: CHK(8)
-- DHCP Client WLAN0: BOUND(10)
Assigned addr
netmask
gateway
DNS addr : 61.41.153.2
DHCP Server IP : 192.168.0.254
Lease Time
Renewal Time
[/DA16200] #
2. In the DA16200/DA16600 console window switch to "NET" command mode and run "iperf -I
wlan0 -s" to run the Iperf server:
[/DA16200] # net
Command-List is changed, "NET"
[/DA16200/NET] # iperf -I wlan0 -s
iPerf Server(TCP): Ready
[/DA16200/NET] #
The DA16200/DA16600 is now running in iperf server mode.
3. In the CMD window, run "iperf -I wlan0 -c 192.168.0.103 -t 5 -i 1" to run the Iperf client
test on the laptop:
C:\tools\iperf>iperf.exe -c 192.168.0.66 -t 5 -i 1
------------------------------------------------------------
Client connecting to 192.168.0.66, TCP port 5001
TCP window size: 208 KByte (default)
------------------------------------------------------------
[ 3] local 192.168.219.105 port 53916 connected with 192.168.0.66 port 5001
[ ID] Interval
Transfer
[ 3] 0.0- 1.0 sec 2.62 MBytes 22.0 Mbits/sec
[ 3] 1.0- 2.0 sec 2.50 MBytes 21.0 Mbits/sec
[ 3] 2.0- 3.0 sec 2.38 MBytes 19.9 Mbits/sec
[ 3] 3.0- 4.0 sec 2.38 MBytes 19.9 Mbits/sec
[ 3] 4.0- 5.0 sec 2.38 MBytes 19.9 Mbits/sec
[ 3] 0.0- 5.0 sec 12.2 MBytes 20.5 Mbits/sec
C:\tools\iperf>
The f ollowing results will appear in the DA16200/DA16600 command window:
[TCP] Receive Test (Server)
TCP_RX:[ No ]
[Interval]
TCP_RX:[Total]
0.00- 5.13
User Manual
CFR0012
: 192.168.0.66
: 255.255.255.0
: 192.168.0.254
: 06h 00m 00s
: 03h 00m 00s
Bandwidth
[Transfer]
[Bandwidth]
12.250 MBytes
20.031 Mbits/sec 192.168.0.103:53916
Revision 1.8
61 of 106
Switch to network command mode.
Run Iperf in server mode.
Run the Iperf client test.
Aug. 18, 2023
© 2023 Renesas Electronics
Advertisement
Table of Contents
