Programming Firmware Images In E Studio; Import Launches For Programming Firmware Images; Figure 37: Import Launches; Figure 38: Browse Folder - Renesas FreeRTOS DA16200 User Manual

UM-WI-056
DA16200 DA16600 FreeRTOS Getting Started Guide
NOTE
The current FreeRTOS SDK does not support automatic downloading of the firmware image into flash
2
through the e studio debug interface therefore the firmware must be loaded into SFLASH before starting to
debug the application.
5.7 Programming Firmware Images in e
5.7.1

Import Launches for Programming Firmware Images

Firmware images can be programmed using launches in e
f ollows.
1. Click File > Import and Select Run/Debug > Launch Configurations as f ollows.
2. Click Next, browse <sdk_root_directory>\utility\j-link\scripts\qspi and select
f older win, linux, or python in <sdk_root_directory>\ulitil\j-link\scripts\qspi
according to environment.
3. Click Select Folder and Select launch conf igurations.
User Manual
CFR0012
2
studio
2
studio. The launches can be imported as

Figure 37: Import Launches

Figure 38: Browse Folder

Revision 1.8
49 of 106
Aug. 18, 2023
© 2023 Renesas Electronics