Figure 12: Da16600 Evb Configuration For At-Cmd Over Uart/Spi With External Mcu; Table 12: Da16200 Evb Switch Configuration For At-Cmd Over Uart/Spi With External Mcu; Table 13: Da16200 Evb Connector Configuration For At-Cmd Over Uart/Spi With External Mcu; Table 14: Da16600 Evb Switch Configuration For At-Cmd Over Uart/Spi With External Mcu - Renesas FreeRTOS DA16200 User Manual

Table of Contents

UM-WI-056

DA16200 DA16600 FreeRTOS Getting Started Guide

Table 12: DA16200 EVB Switch Configuration for AT-CMD over UART/SPI with External MCU

SW1

SW2

All OFF

Table 13: DA16200 EVB Connector Configuration for AT-CMD over UART/SPI with External

MCU

Interface

AT Command over UART

AT Command over SPI

Figure 12, Table 14

and

processing over the UART or SPI interf ace using an external MCU. This conf iguration connects

UART2 or SPI of the DA16600 (GPIOC6/7 f or UART or GPIOA2/3/8/9 f or SPI) to the external pin out

connectors.

When using an AT Command over UART, Pin 11 of J3 and Pin 12 of J3 should be connected by a

jumper pin f or BLE-Wi-Fi COEX. Also, when using an AT Command over SPI, Pin 13 of J3 and Pin

14 of J3 should be connected.