Table of Contents
Advertisement
4.4 Software Development Tools
Aside from SKP documentation and sample code, the SKP installer program also installs the
development tools. For details, please see the quick start guide on how to run the SKP installer.
4.4.1 HEW (High-performance Embedded Workshop)
HEW provides a Graphical User Interface (GUI) that integrates the software development tools
and includes the C-compiler, assembler, linker, and editor.
4.4.2 NC30WA Entry Version
The NC30WA Entry version C-compiler included in the SKP has no time expiration, but has the
following limits:
If your development needs exceed the above limitations, please go to the following web site
http://www.renesas.com/eng/products/mpumcu/toolhp/datsheet/m16c_e/nc30wa.htm
download the full version (4 calendar month trial).
4.4.3 KD30 Debugger
KD30 is a remote debugger that runs on the host PC. While communicating with a kernel (i.e. a
ROM monitor program) on the target MCU through the ICD, KD30 provides a highly efficient
evaluation environment. KD30 features include:
•
•
•
•
FoUSB (Flash-over-USB
4.4.4
User programs can run on the SKP16C62P board without the host computer running KD30 by
programming the on-board M16C/62P flash MCU with firmware using FoUSB Programmer. It can
also be used to program other Renesas' M16C Flash MCU's and 740 series MCU's.
SKP16C62P User's Manual Rev. 1.0
Downloaded from
Elcodis.com
electronic components distributor
1. The software comes without warranty.
2. The compiler always compile with "-fansi" option.
3. The compiler optimization settings is fixed and cannot be changed
4. The '-finfo' option for other software tools such as stack viewer, etc. is not supported.
Source-line debug for assembly language, structured assembly language, C language
Run command with 8 breakpoints for M16C/62P (will depend on the M16C MCU)
RAM monitor function
C variable "watch" window
TM
) Programmer
6 / 22
Applications Engineering
and
December 2003
Advertisement
Table of Contents
