Table of Contents
Advertisement
UM-WI-056
DA16200 DA16600 FreeRTOS Getting Started Guide
Figure 66: DA16600 EVB Ver 4.0 Hardware Configuration
DA16600 EVB Ver 5.0 has the f ollowing components:
Table 22: Components on DA16600 EVB
ID
Name
1
DA16600MOD-AACWA32
2
Board information
3
USB Port (Wi-Fi) CN1
4
USB Port (BLE) CN6
5
JTAG Connector J7
6
RTC Wake up2 key SW1
7
RTC Power key SW2
8
Jumper P2
9
Jumper P1
User Manual
CFR0012
Renesas Wi-Fi and Bluetooth
Board version and manufacturing date
Provides UART0 for debug and UART1 for test.
Connect directly to DA14531 for debug only.
Note: Do not use this port during normal operation.
Connector for IARs I-jet JTAG Debugger
Note: Pin 7 on the I-Jet debugger cable is keyed with a white plug so pin
7 must be removed from the EVB.
Switch to wake up the board from sleep mode.
Switch to turn the EVB on and off.
Jumper to measure current used by the Wi-Fi device.
For normal operation, this jumper must be shorted.
Jumper to measure current used by the Bluetooth
For normal operation, this jumper must be shorted.
Revision 1.8
81 of 106
Description
®
LE Module.
®
LE device.
© 2023 Renesas Electronics
Aug. 18, 2023
Advertisement
Table of Contents
