How To Move Project Location; Debugging With J-Link Debug Probe; Installing J-Link; Figure 32: Sdk Root Path Variables - Renesas FreeRTOS DA16200 User Manual

UM-WI-056
DA16200 DA16600 FreeRTOS Getting Started Guide
5.5.3

How to Move Project Location

Project location can be moved to another f older. In order to so do, SDKROOT and SDKRootDir
2
variables in the e studio must be changed.
SDKROOT/SDKRootDir paths are the SDK Root path f rom the project location.(SDKROOT and
SDKRootDir must be same path.)
studio → Project → Properties → Resource → Linked Resources → SDKROOT
2
e
studio → Project → Properties → C/C++ Build → Build Variable → SDKRootDir
2
e
5.6

Debugging with J-Link Debug Probe

5.6.1

Installing J-Link

To debug the DA16200/DA16600, a J-Link debug probe and the J-Link sof tware is required.
A list of the available debug probes can be f ound on the Segger website:
https://www.segger.com/products/debug -probes/j-link/models/model-overview/
The J-link sof tware can be downloaded f rom the Segger website:
https://www.segger.com/downloads/jlink/
Download and install the version f or your specif ic OS.
User Manual
CFR0012

Figure 32: SDK Root Path Variables

Figure 33: Download J-Link Software

Revision 1.8
46 of 106
Aug. 18, 2023
© 2023 Renesas Electronics