UM-WI-056
DA16200 DA16600 FreeRTOS Getting Started Guide
Command
Parameter
-I [interface]
iperf
[-s|-c host]
[options]
mqtt_client
[options]
cli
[options]
debug
[options]
rssi
[wlan0|wlan1]
Getsysmode
[none]
B.2
CLI Command
B.2.1
Overview
The DA16200 supplicant plays a key role in providing users with Wi-Fi f unctionality. Major f unctions
include IEEE 802.11 management f rame, various security f unctions (WPA & RSN by IEEE 802.11i)
and Command Line Interf ace (CLI) to control DA16200 Wi-Fi perf ormance. The CLI in DA16200 can
execute commands in the network command state.
For example, in Station Mode the network inf ormation of DA16200 can be displayed using the cli
status command while in network command state:
[/DA16200] # net
Command-List is changed, "NET"
[/DA16200/NET] # cli status
sta0
mac_address=d4:3d:39:10:a2:48
bssid=80:ca:4b:30:02:0a
ssid=U+Net0208
id=0
mode=STATION
key_mgmt=WPA2-PSK
pairwise_cipher=CCMP
group_cipher=CCMP
channel=4
wpa_state=COMPLETED
User Manual
CFR0012
Description
●
addr [server] : First SNTP server address
●
addr_2 [server] : Second SNTP server address
●
addr_3 [server] : Third SNTP server address
●
period [second] : Set SNTP renewal time
●
sync : Run SNTP sync with current SNTP server
Setup Iperf client/server
Run or show the status of the MQTT Client
●
start : start mqtt_client
●
stop : stop mqtt_client
●
check : check mqtt_client connection
●
-m {msg} [topic]
: if [topic] is not specified the one stored in nvram is used
●
-l : publish long message
See the CLI section
Execute various types of debug commands
●
arp [on|off]: arp debug message output on/off
●
dhcpd [level]: DHCP Server debug level setting (level=0~2
default 0)
●
dhcpc [level]: DHCP Client debug level setting (level=0~5
default 1)
●
umac [on|off] mask: debug umac 1 0x4
Show RSSI value for currently connected interface
Show current Wi-Fi operation mode
Switch to network command mode.
Display Network Information.
Revision 1.8
87 of 106
publish {msg} with [topic]
© 2023 Renesas Electronics
Aug. 18, 2023