UM-WI-056
DA16200 DA16600 FreeRTOS Getting Started Guide
4. Click Finish and Conf irm launch conf igurations in Run > External Tools menu.
Figure 40: Launch Configurations for Programming Firmware Images
NOTE
SDKJFlash project must be imported before programming. (See Section
●
Python 3.8 must be installed to use jlink_xxx_py scripts.
●
For Linux OS
○
Check python version in the terminal using the command as below.
–
python --version
○
If you get a Command 'python' not found error as shown below, you need to make a
symbolic link for python command.
User Manual
CFR0012
Figure 39: Select Launch Configurations
Revision 1.8
50 of 106
5.4
and
Figure
20)
Aug. 18, 2023
© 2023 Renesas Electronics