UM-WI-056
DA16200 DA16600 FreeRTOS Getting Started Guide
A.3
DA16600 EVB Ver 5.0
Figure 65
shows the hardware conf iguration of the DA16600 EVB.
Figure 65: DA16600 EVB Hardware Configuration
DA16600 EVB has the f ollowing components:
Table 20: Components on DA16600 EVB
No
Name
1
DA16600MOD-AACWA32
2
Board information
CN1 – USB Port (Wi-Fi)
3
CN6 – USB Port (BLE)
4
J7 – JTAG Connector
5
SW1 – RTC Wake up2 key
6
SW2 – RTC Power key
7
User Manual
CFR0012
Description
Renesas Wi-Fi and Bluetooth
Board version and manufacturing date
Provides UART0 for debug and UART1 for test.
Connect directly to DA14531 for debug only.
Note: Do not use this port during normal operation.
Connector for IARs I-jet JTAG Debugger
Note: Pin 7 on the I-Jet debugger cable is keyed with a white plug
so pin 7 must be removed from the EVB.
Switch to wake up the board from sleep mode.
Switch to turn the EVB on and off.
Revision 1.8
78 of 106
®
LE Module.
Aug. 18, 2023
© 2023 Renesas Electronics