Starting With The Immobilizer - Internal Transponder (Option) - Wacker Neuson 2503 Operator's Manual

Operation
3.11 Starting with the immobilizer – internal transponder (option)
A
2 x
Fig. 92: Immobilizer key – internal transponder
1
0
2
C
Fig. 93: Starting with immobilizer – internal transponder
3-24
A = operator's key (blue key)
B
For starting the machine. Scope of delivery includes 2 keys.
B = master key (red key)
Information!
Store the master key in a safe place. It is only used for coding new keys.
1 x
All keys are deleted if the key remains in position 1 for more than 20 seconds.
The flashing LED C indicates the active status of the antitheft protection.
The machine can be started without performing any further settings.
3
Coding a new key
☞
Insert master key B in the starter
☞
Turn the starting key to position 1 for a maximum 5 seconds
☞
Turn the starting key to position 0 and remove master key B
☞
Now insert the new key or the key requiring coding in the starter and turn it to position 1
within 15 seconds
☞
This action registers the key
The procedure is automatically cancelled if no key requiring coding is detected within 15
seconds. Several keys requiring coding can be inserted one after another in the starter.
Each key must then remain at least 1 second in position 1. Coding can be performed for a
maximum 10 keys.
Deleting coded keys
Deleting coded keys is necessary whenever a coded key is lost.
☞
Insert master key B in the starter
☞
Turn the starting key to position 1 for a minimum 20 seconds
☞
All coded keys are deleted after 20 seconds, and all existing keys can be re-coded.
☞
The master key code is not deleted during deletion.
OM 25-3503 us – Edition 4.1 * * 2503_3503b330.fm