Additional Oil Change And Filter Replacement (Hydraulic System) - Wacker Neuson 2503 Operator's Manual

Maintenance
Engine oil grade
°C -20
API CD, CF, CF-4,
CI-4
ACEA E3, E4, E5
°F -4

Additional oil change and filter replacement (hydraulic system)

Application
Normal work (excavation work)
Percentage of hammer work
5-36
Oil grades for the diesel engine, depending on temperature.
Ambient temperature (°C)
-15 -10 -5 0
SAE 10W
SAE 20W
SAE 10W-30
5 14 23 32
NOTICE
An additional oil change and filter replacement can be required depending on
how the machine is used. Failure to observe these replacement intervals can
cause damage to hydraulic components.
• Observe the following intervals
Hydraulic oil
Every 1000 o/h
20 % Every 800 o/h
40 % Every 400 o/h
60 % Every 300 o/h
Over 80 % Every 200 o/h
Information!
Please refer to the maintenance plan on page
5 10 15 20
SAE 10W-40
SAE 15W-40
SAE 20
SAE 30
41 50 59 68
Hydraulic oil filter insert
Replace the first time after 50 o/h, then every 500 o/h
OM 25-3503 us – Edition 4.1 * * 2503_3503b530.fm
25 30 35 40
SAE 40
77 86 95 104
300 o/h
100 o/h
5-38 for additional maintenance.