Shatter protection (Option)
Work range and restricted visibility
0°
120 cm
(47 in)
70°
70°
Fig. 72: Example: work range with hydraulic hammer
OM 25-3503 us – Edition 4.1 * 2503_3503b210_us.fm
The optional shatter protection protects the operator against material falling from the front.
DANGER
WARNUNG
Stabbing/puncture/crushing hazard from falling objects
(fragments or splinters) projected from front of machine.
Objects will cause serious or deadly injuries.
•
When working in areas with a risk of falling or projected objects, an operator
safety shield must be installed (option equipment).
•
Machine operation is prohibited under these conditions without the operator
safety shield installed.
W
WARNING
WARNUNG
Personal injury hazard! Do not modify the shatter protection.
Failure to follow this precautionary measure can lead to severe injury or death.
•
No drilling, cutting or grinding.
•
Do not mount any brackets.
•
Do not perform any welding/bonding work.
•
Replace the complete protective structure if it is damaged, deformed and/or
cracked.
•
If you are not sure, always contact a Wacker Neuson dealer.
•
Repair work may be performed by a Wacker Neuson dealer only.
Important
Do not use brushes, steel wool or other abrasive cleaners for cleaning the
polycarbonate disc. Do not wipe dust in a dry state.
W
WARNING
WARNUNG
Accident hazard! The size of the work range depends on the
attachment used.
Risk of injury.
•
– see Operator's Manual of attachment
– see example: work range with hydraulic hammer
•
Do not use the attachment outside the defined work range.
NOTICE
Stop working when visibility is restricted due to rain, snowfall, dust etc.
☞
Resume work only if visibility is no longer restricted.
Safety instructions
Fig. 72
2-9