Replacing The Filter - Wacker Neuson 2503 Operator's Manual

Maintenance

Replacing the filter

E
Fig. 278: Removing the lower housing section
B
Fig. 279: Removing the filter element
5-12
• Replace outside filter B as follows:
☞
Stop the engine
☞
Remove the key and carry it with you
☞
Let the engine cool down
☞
Open the engine cover
☞
Remove dirt and dust from the air filter and the area around the air filter
☞
Turn the lower housing section E to the left
G
☞
Remove lower housing section E
☞
Carefully remove outside filter B with slightly turning movements
☞
Ensure that all dirt (dust) inside the upper and lower housing sections (F and E),
including dust valve G, has been removed
☞
Clean the parts with a clean lint-free cloth, do not use compressed air
☞
Check the air filter cartridges for damage, only install intact filters
☞
Carefully insert the new outside filter B in the upper housing section F
☞
Position lower housing section E (ensure that it is properly seated)
☞
Turn the lower housing section E to the right
OM 25-3503 us – Edition 4.1 * * 2503_3503b520.fm