Related Manuals for Wacker Neuson 50Z3
Summary of Contents for Wacker Neuson 50Z3
- Page 1 1000183745 0309 Track Excavator 50Z3, 6003 OPERATOR’S MANUAL...
- Page 2 Wacker Neuson's written authorisation, otherwise warranty and product liability for possible damage caused by these modifications shall not be applicable. Your Wacker Neuson dealer will be pleased to answer any further questions regarding the machine or the Operator's Manual. Abbreviations / symbols •...
- Page 3 Door handle and lock Fixture for rotating beacon Rear light Tank filler inlet Hydraulic oil filler inlet Muffler pipe Counterweight (option) Lubrication point for chain tension Fig. 1: Machine outside views OM 50Z3 6003 US – Edition 3.5 * * 5003b110.fm...
- Page 4 • FOPS (Falling Object Protective Structure), TOPS (Tip Over Protective Structure) and ROPS (Roll Over Protective Structure) tested closed cab (standard). • Models 50Z3 and 6003: water-cooled Yanmar four cylinder diesel engine • Sturdy steel sheet chassis; rubber-mounted engine Travelling drive The diesel engine permanently drives the twin axial variable displacement pump whose oil flow is sent to a hydraulic motor for each track drive.
- Page 5 In order to avoid damage to the machine, only the attachments listed below have been certified for installation on the machine. • Contact your Wacker Neuson dealer if you wish to use other attachments. Using tools of other manufacturers, or tools which have been released for other excavator types, can reduce the machine's output and stability considerably, and can also cause damage to the machine and injuries to the operator or the staff.
- Page 6 • Persons are expected to perform work reliably. • They have been appointed by the contractor for driving and servicing the earth moving machine. • Get informed on and follow the legal regulations of your country. OM 50Z3 6003 US – Edition 3.5 * 5003b110.fm...
- Page 7 Introduction EC declaration of conformity version 50Z3 up to serial number AH00578 EC Declaration of Conformity according to EC Directive 98/37/EC, 2000/14/EC Appendix 6 Wacker Neuson Linz GmbH Haidfeldstr. 37 A-4060 Linz-Leonding declare, under their own responsibility, that the product...
- Page 8 Introduction EC declaration of conformity version 50Z3 from serial number AH00579 EC Declaration of Conformity according to EC Directive 98/37/EC, 2000/14/EC Appendix 6 Wacker Neuson Linz GmbH Haidfeldstr. 37 A-4060 Linz-Leonding declare, under their own responsibility, that the product Product name...
- Page 9 Place of storage of technical documentation: Wacker Neuson Linz GmbH Department: R & D Haidfeldstr. 37 A-4060 Linz-Leonding Linz-Leonding, (date) _ _ _ _ _ _ Josef Erlinger Wacker Neuson Linz GmbH OM 50Z3 6003 US – Edition 3.5 * * 5003b110.fm...
- Page 10 Place of storage of technical documentation: Wacker Neuson Linz GmbH Department: R & D Haidfeldstr. 37 A-4060 Linz-Leonding Linz-Leonding, (date) _ _ _ _ _ _ Josef Erlinger Wacker Neuson Linz GmbH OM 50Z3 6003 US – Edition 3.5 * 5003b110.fm...
- Page 11 Specifications on page 6-1 Fig. 2: Type label Cab certification number The type label (arrow) is located in the cab, on the rear right chassis member. Fig. 3: Cab type label 1-10 OM 50Z3 6003 US – Edition 3.5 * * 5003b110.fm...
- Page 12 The type label (arrow) is located on the cylinder-head cover (engine). Example: Yanmar 46557 Fig. 4: Diesel engine type label up to serial number Fig. 4: Diesel engine number AH00578 Fig. 4: Diesel engine type label from serial number AH00579 1-11 OM 50Z3 6003 US – Edition 3.5 * 5003b110.fm...
- Page 13 Introduction 1.11 Label overview 1-12 OM 50Z3 6003 US – Edition 3.5 * * 5003b110.fm...
- Page 14 On each undercarriage at the idler end of the structure. Fig. 8: Direction arrows Description Fill location for diesel fuel only. Location On the fuel tank filler neck. Fig. 9: Diesel 1-13 OM 50Z3 6003 US – Edition 3.5 * 5003b110.fm...
- Page 15 Explains the functions of the joysticks (control pattern "B"). Check before starting the machine which control pattern you have chosen! Location On the cabin roof. Fig. 13: Control pattern B 1-14 OM 50Z3 6003 US – Edition 3.5 * * 5003b110.fm...
-
Page 16: Safety Labels
Contents are under pressure. Do not remove cap. Location In the engine compartment. Fig. 16: Rotating V-belt Description Hot surface! Do not touch. Location Engine compartment near muffler system. Fig. 17: Hot surfaces 1-15 OM 50Z3 6003 US – Edition 3.5 * 5003b110.fm... - Page 17 Crushing hazard. Bystanders must stay clear of the machine when it is being operated. Location On the left and right side of the boom swing console on the chassis. Fig. 23: Keep distance 2 1-16 OM 50Z3 6003 US – Edition 3.5 * * 5003b110.fm...
- Page 18 Attention! Before leaving the machine, lower all equipment to ground, remove the key and lock the controls. Location On the b-pillar in the cabin. Fig. 26: Read manual before maintaining or repairing 1-17 OM 50Z3 6003 US – Edition 3.5 * 5003b110.fm...
- Page 19 • The maximum number of holes is two. Fig. 28: Position of fire extinguisher Important! Check the fire extinguisher at regular intervals, also make sure it is safely mounted. 1-18 OM 50Z3 6003 US – Edition 3.5 * * 5003b110.fm...
Need help?
Do you have a question about the 50Z3 and is the answer not in the manual?
Questions and answers
how to access the battery
To access the battery on a Wacker Neuson 50Z3, follow these steps:
1. Unlock the engine cover using the ignition key of the preheating start switch.
2. Turn the ignition key in lock A to the right (R) to unlock.
3. Firmly press down the engine cover until lock A engages with an audible click to close it after accessing the battery.
The battery master switch is located in the engine compartment. Before working on the battery or electrical system, turn key A of the battery master switch to position B and remove it to interrupt the power supply.
This answer is automatically generated