Working Alongside Trenches; Stabilizer Blade At Rear - Wacker Neuson 2503 Operator's Manual

Working alongside trenches

B
A
Fig. 254: Working alongside trenches

Stabilizer blade at rear

OM 25-3503 us – Edition 4.1 * 2503_3503b340.fm
NOTICE
Danger of damaging piston rod A of the boom cylinder when working
alongside trenches, slopes, etc. and operating the stabilizer blade and the
boom incorrectly.
• Always use stabilizer blade B for stabilization during excavation work
• Ensure that stabilizer blade B never touches piston rod A
• If you perform deep excavations with stabilizer blade B at the front, ensure
that piston rod A does not touch or rest on stabilizer blade B
Warning! WARNING
Tipping hazard of machine alongside trenches!
Can cause serious injury or death.
• Use this work position only in an extreme emergency since the machine
can tip over forward into the trench.
• We recommend using the first work position
and to ensure that piston rod A does not touch stabilizer blade B under any
circumstances.
Fig. 255: Deep excavation
Operation
(Fig. 254).
(Fig. 254).
(Fig. 254) described above
3-107