Check Lists; Start-Up Checklist - Wacker Neuson 2503 Operator's Manual

Check lists

Start-up checklist

OM 25-3503 us – Edition 4.1 * 2503_3503b320.fm
The checklists below are intended to assist you in checking and monitoring the machine
before, during and after operation.
These checklists cannot claim to be exhaustive; they are merely intended as an aid for you
in fulfilling your duties as a conscientious operator.
The checking and monitoring work listed below is described in greater detail in the follow-
ing chapters.
If the answer to one of the following questions is NO, first rectify the cause of the fault
before starting or continuing work.
Check the following points before putting the machine into operation or starting the engine:
No. Question
1 Enough fuel in the tank? (➠ 5-2)
2 Coolant level OK? (➠ 5-8)
3 Water drained from the water separator? (➠ 5-4)
4 Engine oil level OK? (➠ 5-5)
5 Oil level in hydraulic oil reservoir OK? (➠ 5-15)
6 Water level in washer tank OK? (➠ 3-49)
8 Lubrication points greased? (➠ 5-35)
9 Tracks checked for cracks, cuts, etc.? (➠ 5-19)
Lights, signals, indicators, warning lights and indicator lights OK?
10
(➠ 3-22)
11 Windows, mirrors, lights and steps clean?
12 Control lever base lowered? (➠ 3-57)
13 Attachment safely locked? (➠ 3-107)
14 Engine cover safely locked? (➠ 3-58)
Especially after cleaning, maintenance or repair work:
15
➥
Rags, tools and other loose objects removed?
16 Seating position adjusted correctly? (➠ 3-50)
17 Seat belt fastened? (➠ 3-52)
18 Cabin/canopy installed (➠ 3-63)
Operation
✔
3-9