Picking up an attachment
A
C
Fig. 214:
Fig. 215:
D
Fig. 216:
E
Fig. 217:
OM 25-3503 us – Edition 4.1 * 2503_3503b340.fm
1
Hitch claws A (on the side of the machine) into pins B of the attachment mount.
2
Extend the bucket cylinder so that pin C of the attachment touches the quickhitch.
B
3
Move the attachment inward completely.
4
Unlock switch D and press it to position 1.
➥
The quickhitch is enabled and the buzzer sounds.
1
5
Press and hold the foot-operated push button E and pull the stabilizer-blade lever
backward at the same time.
➥
The quickhitch opens.
➥
Check pin F must be fully extended.
➥
The attachment engages.
F
Operation
3-93