Checking Hydraulic Pressure Lines - Wacker Neuson 2503 Operator's Manual

Maintenance

Checking hydraulic pressure lines

5-18
Specific safety instructions
WARNING Warning!
Danger of fluid escaping under high pressure when check-
ing hydraulic pressure lines!
Can cause serious injury or death.
• Always consult a doctor immediately, even if the wound seems insignifi-
cant. Hydraulic oil causes blood poisoning.
• Do not search for hydraulic leaks with your bare hands. Always wear pro-
tective gloves and search for hydraulic leaks with a piece of cardboard.
• Always observe the following instructions:
• Retighten leaking threaded fittings and hose connections only when the
system is not under pressure. In other words, release the pressure
before working on pressurized lines!
• Never weld or solder damaged or leaking pressure lines and threaded
fittings. Replace damaged parts with new ones!
• Have damaged flexible lines replaced by a Wacker Neuson service
center only!
• Leaks and damaged pressure lines must be immediately repaired or replaced by a
Wacker Neuson service center or after-sales personnel. This not only increases the
operating safety of your machine but also helps to protect the environment
• Replace hydraulic hoses every 6 years from the date of manufacture, even if they do
not seem to be damaged
In this respect, we recommend that you observe all the relevant safety regulations for
hydraulic lines, as well as the safety regulations regarding accident prevention and occu-
pational health and safety in your country. Also observe DIN 20066, part 5.
The article number is marked on the clamping section, and the date of manufacture is indi-
cated on the hose of each hose connection.
OM 25-3503 us – Edition 4.1 * * 2503_3503b520.fm