Special Instructions For Machine Travel On Public Roads; Starting Machine Travel; Drive Levers - Wacker Neuson 2503 Operator's Manual

3.15 Special instructions for machine travel on public roads

3.16 Starting machine travel

3.17 Drive levers

1
4
Fig. 95: Drive lever/accelerator pedal
OM 25-3503 us – Edition 4.1 * 2503_3503b330.fm
The machine is subject to the:
•Applicable legal regulations of your country
Also observe the applicable regulations for accident prevention of your country.
Information!
The machine will not move off unless the control lever on the left is lowered.
After starting the engine:
☞
The alternator charge indicator light goes out
☞
Press the accelerator pedal slowly
➥
Machine travel starts
DANGER
Accident hazard due to incorrectly rotated upper carriage!
If rotated incorrectly, the upper carriage blocks the visibility of the travel path.
☞
Before starting machine travel on a construction site, align the upper car-
riage so that the operator has an unrestricted view of the travel path.
DANGER
Accident hazard! The machine moves in the opposite direc-
tion if the upper carriage is rotated by 180°!
Causes serious injury or death
• Slowly and carefully actuate the drive levers/pedals.
The stabilizer blade side is the front side.
Raise the bucket and the stabilizer blade.
The machine can be moved either with the drive levers or with the pedals. Lock the upper
carriage when traveling over longer distances.
Position Function
1
Push forward
2 Push forward
3
Pull backward
4 Pull backward
3
Pull backward
2 Push forward
1
Push forward
4 Pull backward
Operation
Track excavator moves forward
Track excavator moves backward
Track excavator turns to the left
Track excavator turns to the right
3-27