Safety Instructions Stability Tables - Wacker Neuson 2503 Operator's Manual

Technical datac

Safety instructions stability tables

6-18
The values of the stability table (load diagram) apply to lifting gear applications.
DANGER
Crushing hazard due to tipping over of machine!
The machine causes serious injury or death when it tips over.
• Never exceed the weight and mass values specified in the stability table.
• If a joint rod or Powertilt unit with load hook is installed, the weight of the
attachment must be subtracted from the weight or mass value specified
in the table.
• Use the machine for lifting gear applications only if the mandatory lifting
gear and safety equipment is installed, functional and enabled.
• Lock the oscillating axle in work position.
Information!
If the weight or mass value is exceeded, there is a risk of damage to property if the
machine tips over.
• Never exceed the weight and mass values specified in the stability table.
Information!
The indications are only approximate values. Attachments, uneven ground and
soft or bad ground conditions affect stability, and the weight and mass values. The
operator must take these influences into account.
OM 25-3503 us – Edition 4.1 * * 2503_3503b610.fm