Light System; Working Lights; Roof Lights (Option) - Wacker Neuson 2503 Operator's Manual

Operation

3.24 Light system

Working lights

53
Fig. 111: Light system switches

Roof lights (option)

53
Fig. 112: Roof lights switch
3-36
The switch panel for the light system is located on the instrument panel.
Boom light
☞
Press switch 53 down
ON
☞
Press switch 53 up
OFF
Information!
The symbol can vary depending on version
3-6
Warning! WARNING
Motorists can be blinded by bright lights on the job site!
Can cause serious injury or death.
• Do not switch on the working lights during machine travel on public roads.
During machine operation, only switch the working lights on when no one
can be blinded by it!
Roof lights
☞
Press switch 53 to the 1st position
ON
☞
Press switch 53 to the 2nd position
☞
Press switch 53 up
OFF
The working light illuminates in the first position, the roof lights illuminate, too, in the sec-
ond position.
Information!
The symbol can vary depending on version
3-6
l
➥
Indicator light in switch 53 illuminates
➥
Indicator light in switch 53 goes out
– see Switch panel (right) on page
➥
Indicator light in switch illumi-
nates
➥
Indicator light in switch goes
out
– see Switch panel (right) on page
OM 25-3503 us – Edition 4.1 * * 2503_3503b330.fm