Operate Safely - Wacker Neuson 2503 Operator's Manual

Test All Controls
Follow the manufacturer's recommended warm-up
procedures and bring all machine systems to operating
temperature.
Machines come equipped with various control
configurations, patterns and operating modes. Some
have selectable or configurable controls that allow
operation to suit personal preferences or specific
applications. Make sure that you know which control
pattern has been selected and understand how the
machine will operate.
Make sure the engine is operating correctly. Operate
each machine control to check all functions.
Check for possible interference between the attachment
and the cab and operate appropriately.
Make sure the attachment quick-coupling device (if
equipped) is operating properly, fully engaged and visibly
locked. (See page 17, Quick-coupling Device Safety.)
Check the blade location before traveling. When the
blade is in the rear, operate the steering levers in the
opposite direction as when the blade is in the front.
See the machine manufacturer's manual.
Remember
— Stay in the operator's seat, with the seat belt
fastened, if equipped. If the compact excavator is
equipped with a foldable TOPS/ROPS, do not fasten
the seat belt when the TOPS/ROPS is in the down
position.
— Understand the machine's limitations. Be in control of
the machine at all times.
— Assure yourself that the work area is clear of all
bystanders and other machines. Stop the machine
immediately if anyone approaches.
— If a failure that causes loss of control occurs, stop all
machine motion as quickly as possible. Shut
the machine down and remove the key. Correct or
report the problem immediately.
Remember The Other Person
WARNING! Never allow an untrained or unqualified
person to operate this machine. Handled improperly,
this machine could cause death or serious injury.
Do not allow anyone within the operating work radius of
the compact excavator.
26
Start Safely
Operate the control(s) to ensure correct operation in
forward, neutral and reverse.
Test steering—right and left—while moving slowly.
WARNING! Prevent possible injury from loss of control.
Know and understand the selected control pattern
and operating mode before operating. Be certain
you can control speed, direction, braking and boom
motion before operating the machine.

Operate Safely

Never use a bucket or other attachment as a work
platform or personnel carrier.
WARNING! Prevent possible injury from fall or runover.
The compact excavator is a one-person machine.
NEVER PERMIT RIDERS.
Always look around before you travel or move the
boom. Look in the direction of machine movement.
Awareness on your part can prevent accidents.
Read And
Understand Manuals
Before Operating
Check
Instruments
And Controls
Fasten Seat Belt,
Use TOPS/ROPS
Look Before
Moving The Machine
Or Boom
25