Boom Swivel Controls; Hammer Operation (Option) - Wacker Neuson 2503 Operator's Manual

Boom swivel controls

E
18
Fig. 178: Swiveling the boom

Hammer operation (option)

OM 25-3503 us – Edition 4.1 * 2503_3503b340.fm
Swiveling the boom to the left:
☞
Press and hold button E on the control lever on the left and at the same time, press
hammer pedal 18 to the rear.
Swiveling the boom to the right:
☞
Press and hold button E on the control lever on the left and at the same time, press
hammer pedal 18 to the front.
Important information regarding hammer operation
Use the canopy version only with a shatter protection during hammer operation
chapter Shatter protection (option) on page 3-45.
If the machine is equipped with a cabin (option), the front window must be closed.
WARNING Warning!
Danger of piercing/penetration by objects from the front!
Can cause serious injury or death.
• During operation, all persons must stay clear of the job site of the machine.
• Do not position the machine directly underneath the workplace during dem-
olition, otherwise debris can fall onto the machine or the building can col-
lapse.
• Only work in the job site.
• Operate the canopy version only with a shatter protection. If the machine is
equipped with a cabin (option), the front window must be closed.
Operation
– see
3-73