Setting Down An Attachment - Wacker Neuson 2503 Operator's Manual

Setting down an attachment

Fig. 220:
D
Fig. 221:
E
Fig. 222:
Fig. 223:
OM 25-3503 us – Edition 4.1 * 2503_3503b340.fm
1 Move the attachment inward completely and position it at 5 – 10 cm (2 – 4 in)
above the ground.
2 Press switch D to position 1.
➥
The quickhitch is enabled and the buzzer sounds.
1
3 Press and hold the foot-operated push button E and pull the stabilizer-blade lever
backward at the same time.
➥
The quickhitch opens.
➥
Check pin F must be fully extended.
F
4 Retract the bucket cylinder.
➥
The attachment is lowered to the ground.
Operation
3-95