Threaded fittings and attachments
Pivots and hinges
5.14 Lubrication points
OM 25-3503 us – Edition 4.1 * 2503_3503b530.fm
All threaded fittings must be checked regularly for tightness, even if they are not listed in
the maintenance schedules.
☞
Engine fastening screws
☞
Fastening screws on the hydraulic system
☞
Line, bucket teeth and pin fastenings on the attachment
Retighten loose connections immediately. Contact a Wacker Neuson service center if nec-
essary.
All mechanical pivot points on the machine (for example door hinges, joints) and fittings
(for example door arresters) must be lubricated regularly, even if they are not listed in the
lubrication plan.
Lubricate the lubrication points with the green caps once a week.
Lubricate the lubrication points with the blue caps daily.
Maintenance
5-27