Safe Load Indicator (Option); Safety Feature "Hose Burst Valve" (Option) - Wacker Neuson 2503 Operator's Manual

Operation

3.57 Safe load indicator (option)

44
Fig. 239: Safe load indicator light

Safety feature "Hose burst valve" (option)

3-102
Warning! WARNING
Crushing hazard due to tipping over of machine!
Can cause serious injury or death.
• Always switch on the safe load indicator!
• Contact a Wacker Neuson dealer should the safe load indicator not be
adjusted correctly
Switch on the safe load indicator as follows:
39
☞
Press switch 44 on the instrument panel
➥
Indicator light 39 on the round indicating instrument illuminates in case of overload
The safe load indicator light illuminates, and an acoustic warning is given, to warn the
driver he has reached the maximum permissible load-carrying capacity. Any further
increase of the load moment can cause the machine to overturn in this situation. Therefore
the operator must immediately reduce the load moment as follows:
☞
Reduce reach until both the acoustic signal and the indicator light in the display ele-
ment go out
The switch position can vary depending on version
The "Hose burst valve" safety feature prevents the boom from being lowered without being
braked, in the event of a bursting hose or pipe.
Proceed as follows in case of damage:
1 Stop the machine immediately.
2 Perform emergency lowering if possible.
3 Raise the control lever base on the left.
4 Stop the engine.
5 Remove the starting key and lock the cabin.
6 Secure the machine and the attachment.
7 Contact a Wacker Neuson service center and have the malfunction rectified.
Environment!
Collect the drained hydraulic oil in a suitable container.
☞
Dispose of drained hydraulic oil by an ecologically safe method
☞
Always contact the relevant authorities or commercial establishments in charge of oil
disposal before disposing of biodegradable oil
– see Switch panel (right) on page 3-14
OM 25-3503 us – Edition 4.1 * * 2503_3503b340.fm