Preparing To Use The Machine; Conditions For Use; User Training And Knowledge; Preparing For Use - Wacker Neuson 2503 Operator's Manual

2.5

Preparing To Use The Machine

Conditions for use

User training and knowledge

Preparing for use

OM 25-3503 us – Edition 4.1 * 2503_3503b210_us.fm
• The machine has been designed and built in accordance with state-of-the-art standards
and the recognized safety regulations. Nevertheless, its use can constitute a risk to life
and limb of the user or of third parties, or cause damage to the machine and to other
material property.
• Read and follow this Operator's manual and other manuals that accompany the
machine.
• The machine must only be used in accordance with its designated use and the instruc-
tions set forth in the Operator's manual.
• The machine must only be used by qualified operators who are fully aware of the risks
involved in operating the machine.
• Before putting the machine into operation, inspect the machine for safety in work and
road operation.
• Do not start, move or operate a damaged or malfunctioning machine. Any mechanical
dysfunctions, especially those affecting the safety of the machine, must be repaired
immediately. Only qualified technicians shall determine how to move a damaged or
malfunctioning machine to a safe place for diagnoses and repair.
• The user/owner commits himself to operate and keep the machine in serviceable
condition and, if necessary or required by law, to require the operating or servicing
persons to wear protective clothing and safety equipment.
• Always keep this Operator's Manual and other manuals that accompany the machine in
their storage compartment provided in the operator station on the machine. Immedi-
ately replace an incomplete or illegible Operator's Manual.
• All persons working on or with the machine must read and understand the safety infor-
mation in this Operator's Manual before beginning work. This applies especially to
persons working only occasionally on the machine, such as performing set-up or
maintenance tasks.
• Follow, and instruct the operator in, legal and other mandatory regulations relevant to
accident prevention and environmental protection. These may include handling
hazardous substances, issuing and/or wearing personal protective equipment, or
obeying traffic regulations.
• The user/owner must regularly ensure that all persons entrusted with operation or
maintenance of the machine are working in compliance with the Operator's Manual and
are aware of risks and safety factors of the machine.
• Before starting the machine, ALWAYS inspect the machine to make sure that it is ready
for safe work and travel operation.
• Wear close-fitting work clothes that do not hinder movement. Tie back long hair and
remove all jewelry (including rings).
Safety instructions
2-3