Working With The Excavator; Inadmissible Work Procedures - Wacker Neuson 2503 Operator's Manual

3.58 Working with the excavator

Inadmissible work procedures

Fig. 240: Working with the swivel force
Fig. 241: Working with the drive force
Fig. 242: Working with the falling force by lowering the bucket
OM 25-3503 us – Edition 4.1 * 2503_3503b340.fm
Working with the swivel force
☞
Do not use the swivel force of the upper carriage to tear down walls or to create level
surfaces.
☞
Never ram the attachment into the ground when swiveling the upper carriage.
➥
This can damage the machine and/or the attachment.
Working with the drive force
☞
Never ram the attachment into the ground to dig during machine travel.
➥
This can damage the machine and/or the attachment.
Working with the falling force by lowering the bucket
☞
Do not use the falling force of the attachment as a hoe, hammer or pile-driver.
➥
This can damage the machine and/or the attachment.
Operation
3-103