Lift Capacity Table 2503 - Wacker Neuson 2503 Operator's Manual

Technical datac

6.13 Lift capacity table 2503

A
B
3.0 m 415* 415*
(9'-8") (915*) (915)
2.0 m 410* 350
(6'-6") (904*) (772)
1.0 m 425* 310
(3'-3") (937*) (683)
0.0 m 450* 315
(0'-0") (992*) (694)
1.0 m 475* 380
( 3'-3") (1,047*) (838)
2.0 m 445* 445*
( 6'-6") (981*) (981*)
Fig. 308: Lift capacity table (model 2503)
6-14
All table indications in kg and horizontal position on firm ground without bucket.
3.5 m
(11'-5")
400*
(882*)
410* 380 420*
(904*) (838) (926*)
460* 365 540*
(1,014*) (805) (1,190*)
505* 355 635*
(1,113*) (783) (1,400*)
580*
(1,279*)
max Permissible load on extended stick
A Reach from live ring center
B Load hook height
* Lift capacity limited by hydraulic system
With the stabilizer blade in travel direction
Without the stabilizer blade, 90° to travel direction
If equipped with a bucket or other attachments, lift capacity or tilt load is reduced by bucket
or attachment dead weight.
Calculation basis: according to ISO 10567
The compact excavator's lift capacity is restricted by the settings of the pressure limiting
valves and the hydraulic system's stabilizing features.
Neither 75 % of the static tilt load nor 87 % of the hydraulic lift capacity is exceeded.
3.0 m 2.5 m
(9'-8") (8'-2")
400*
(882*)
420* 460*
(926*) (1,014*) (1,014*)
460 670*
(1,014) (1,477*)
440 835*
(970) (1,841*)
435 790*
(959) (1,742*)
OM 25-3503 us – Edition 4.1 * * 2503_3503b610.fm
2.0 m
(6'-6")
460*
595 1000* 815
(1,312) (2,205*) (1,797)
560 1210* 770
(1,235) (2,668*) (1,698)
560 1030* 775
(1,235) (2,271*) (1,709)
435* 435*
(959*) (959*)